Committees

Conference Chairs

Ken-ichiro Mori (Toyohashi University of Technology, Japan)
Yohei Abe (Toyohashi University of Technology, Japan)
Tomoyoshi Maeno (Yokohama National University, Japan)

Danuta Szeliga (AGH University of Science and Technology, Poland)
Krzysztof Muszka (AGH University of Science and Technologyw, Poland)

Livan Fratini (University of Palermo, Italy)
Fabrizio Micari (University of Palermo, Italy)

Steering Committee

Maciej Pietrzyk (AGH University of Science and Technology, Poland)
Jan Kusiak (AGH University of Science and Technology, Poland)
Janusz Majta (AGH University of Science and Technology, Poland)
Peter Hartley (University of Birmingham, UK)
Jianguo Lin (Imperial College London, UK)

Scientific Committee

Y. Abe (Toyohashi University of Technology, Japan)
T. Aizawa (Shibaura Institute of Technology , Japan)
J.M. Allwood (University of Cambridge, UK)
L. M. Alves (Instituto Superior Técnico, Portugal)
A. F. M. Arif (King Fahd University of Petroleum & Minerals, Saudi Arabia)
B. Awiszus (TU Chemnitz , Germany)
M. Bakhshi-Jooybari (Babol University of Technology, Iran)
T. Balan (Arts et Metiers ParisTech, France)
D. Banabic (Technical University of ClujNapoca, Romania)
F. Barlat (Pohang University of Science & Technology, Korea)
T. Barriere (ENSMM, Besançon, France)
F. Bay (MINES ParisTech, France)
B.-A. Behrens (Universität Hannover, Germany)
Y. Beygelzimer (Donetsk Physics & Engineering Institute of the National Academy of Sciences of Ukraine, Ukraine)
R. Bigot (Arts et Metiers ParisTech, France)
P.O. Bouchard (MINES ParisTech, France)
P. Breitkopf (Université de Technologie de Compiègne, France)
A. Brosius (TU Dresden, Germany)
S. Bruschi (University of Padova, Italy)
B. Buchmayr (University of Leoben, Austria)
S. Button (DEMM-FEM-UNICAMP, Brazil)
J.-G. Cao (University of Science and Technology Beijing, China)
E. Ceretti (University of Brescia, Italy)
P. R. Cetlin (Federal University of Minas Gerais , Brazil)
L. C. Chan (The Hong Kong Polytechnic University, Hong Kong)
C.-C. Chang (National Kaohsiung University of Applied Sciences, Taiwan)
F. K. Chen (National Taiwan University, Taiwan)
Z. C. Chen (Tottori University, Japan)
F. Chinesta (Ecole Centrale de Nantes , France)
L. Cser (Corvinus University of Budapest, Hungary)
E. Cueto (University of Zaragoza, Spain)
G. Daehn (Ohio State University, USA)
P. P. Date (Indian Institute of Technology, India)
L. Donati (University of Bologna, Italy)
L. Filice (University of Calabria, Italy)
L. Fourment (CEMEF-Centre for Forming Processes, France)
L. Fratini (University of Palermo, Italy)
M. Fukumoto (Toyohashi University of Technology, Japan)
T. Furushima (Tokyo Metropolitan University, Japan)
L. Galdos (Mondragon University, Spain)
S. F. Golovashchenko (Oakland University, USA)
P. Groche (Darmstadt University, Germany)
Z. J. Gronostajski (Wrocław University of Technology, Poland)
I. Gutierrez (Centre of Studies and Technical Research, Spain)
A. M. Habraken (University of Liege, Belgium)
T. Hama (Kyoto University, Japan)
K. Hayakawa (Shizuoka University, Japan)
G. Hirt (RWTH Aachen, Germany)
P. Hodgson (Deakin University, Australia)
O.S. Hopperstad (Norwegian University of Science and Technology, Norway)
P. Hora (ETH Zurich, Switzerland)
H. Huh (Korea Advanced Institute of Science and Technology , Korea)
S.-M. Hwang (Pohang University of Science and Technology, Korea)
Y.-M. Hwang (National Sun Yat-sen University, Taiwan)
T. Iizuka (Kyoto Institute of Technology, Japan)
Y.-T. Im (KAIST, Korea)
M. Izaki (Toyohashi University of Technology, Japan)
Z. Jiang (University of Wollongong, Australia)
R. Kawalla (TU Berakademie Freiberg, Germany)
S. Khoddam (Deakin University, Australia)
B.-M. Kim (Pusan National University, Korea)
B. L. Kinsey (University of New Hampshire, USA)
K. Kitamura (Nagoya Institute of Technology, Japan)
M. Kleiner (TU Dortmund, Germany)
D.-C. Ko (Pusan National University, Korea)
Y.P. Korkolis (University of New Hampshire, USA)
M. Krzyzanowski (Birmingham City University, UK)
T. Kuboki (University of Electro-Communications, Japan)
J. Kusiak(AGH University of Science and Technology, Poland)
T. Kuwabara (Tokyo University of Agriculture and Technology, Japan)
J. Larkiola (University of Oulu, Finland)
Y.S. Lee (Kookmin University, Korea)
Y. Lee (Korea Institute of Materials Science, Korea)
R.-S. Lee (National Cheng Kung University, Taiwan)
J. Li (Huazhong University of Science and Technology, China)
Z. Li (Beijing Aeronautical Manufacturing Technology Research Institute, China)
M. Liewald (Stuttgart University, Germany)
H. Lin (Wuhan University of Technology, China)
J. Lin (Imperial College, UK)
L.-E. Lindgren (Luleå University of Technology , Sweden)
X. Liu (Northeastern University, China)
H. Long (University of Sheffield, UK)
J. Łuksza (AGH University of Science and Technology, Poland)
X. Lu (University of Science and Technology Beijing, China)
L. Madej (AGH University of Science and Technology, Poland)
T. Maeno (Yokohama National University, Japan)
J. Majta (AGH University of Science and Technology, Poland)
P.A.F. Martins (University of Lisbon, Portugal)
E. Massoni (MINES ParisTech, France)
R. Matsumoto (Osaka University, Japan)
M. Merklein (Universität Erlangen-Nürnberg, Germany)
F. Micari (University of Palermo, Italy)
W. Z. Misiolek (Lehigh University, USA)
H. Miura (Toyohashi University of Technology, Japan)
P. Montmitonnet (MINES ParisTech, France)
Y. H. Moon (Pusan National University, Korea)
O. Music (TED University, Turkey)
K. Mori (Toyohashi University of Technology Toyohashi, Japan)
K. Muszka (AGH University of Science and Technology, Poland)
T. Neitzert (Auckland University of Technology, New Zealand)
G. Ngaile (North Carolina State University, USA)
N. Ohtake (Tokyo Institute of Technology, Japan)
M. Otsu (Fukui University, Japan)
T. Oya (Keio University, Japan)
F. Ozturk (Turkish Aerospace Industries, Inc., Turkey)
Z. Pater (Lublin University of Technology, Poland)
A.M. Pesin (Nosov Magnitogorsk State Technical University, Russia)
H. Paul (Institute of Metallurgy and Materials Science PAN, Poland)
M. Pietrzyk (AGH University of Science and Technology, Poland)
J.-P. Ponthot (University of Liege, Belgium)
V. Premanond (King Mongkut's University of Technology, Thailand)
Y. Qin (University of Strathclyde, UK)
L. Rauch (AGH University of Science and Technology, Poland)
A. Rosochowski (University of Strathclyde, UK)
D. Shan (Harbin Institute of Technology, China)
K. Shinagawa (Kyushu University, Japan)
K. Shizawa (Keio University, Japan)
S. Suzuki (Waseda University, Japan)
D. Szeliga (AGH University of Science and Technology, Poland)
S. Takahashi (Nihon University, Japan)
H. Takuda (Kyoto University, Japan)
C. J. Tan (University of Malaya, Malaysia)
S. Tanaka (Shizuoka University, Japan)
A.E. Tekkaya (TU Dortmund, Germany)
M. Tisza (University of Miskolc, Hungary)
Y. Todaka (Toyohashi University of Technology, Japan)
T. Uemori (Okayama University, Japan)
V. Uthaisangsuk (King Mongkut's University of Technology, Thailand)
H. Utsunomiya (Osaka University, Japan)
A.H. van den Boogaard (University of Twente, Netherlands)
W. Volk (Technische Universitat Munchen, Germany)
B. Wang (University of Science and Technology Beijing, China)
Z.G. Wang (Gifu University, Japan)
M. Worswick (University of Waterloo, Canada)
J.-X. Xie (Beijing University of Science and Technology, China)
M. Yamashita (Gifu University, Japan)
A. Yanagida (Tokyo Denki Universi, Japan)
J. Yanagimoto (University of Tokyo, Japan)
W. Yang (Beijing University of Chemical Technology, China)
M. Yang (Tokyo Metropolitan University, Japan)
J.-W. Yoon (Deakin University, Australia)
Y. Yoshida (Gifu University, Japan)
H. Yoshihara (Yamanashi Uniersity, Japan)
M. Yoshino (Tokyo Institute of Technology, Japan)
S.J. Yuan (Harbin Institute of Technology, China)
N. Yukawa (Nagoya University, Japan)
L. Zhan (Central South University, China)
S.-H. Zhang (Institute of Metal Research, China)
J. Zhao (Yanshan University, China)
G.Q. Zhao (Shandong University, China)


Metal Forming 2018 Home Page